Contract Services

Laser Marking:

Laser Marked Banded Tubes Dark Laser Engraving on Brass 0.060 Needle with Laser Marked Ecogenic Bands
Laser Marking on Aluminum Ring Laser Engraved Aluminum Business Cards Laser Marked Calibrated Banding on Tubular Components

Laser Welding:

Laser Welded Tube Ferrule Butt Laser Weld - Magnified 10x Circular Fillet Weld - Magnified 10x
Circular Laser Weld - Magnified 10x Seam Laser Weld - Magnified 60x Laser Welded Lamination Stack

Laser Cutting

Laser Cut Tube Sample #1 Laser Cut Tube Sample #2 Laser Cut Tube Sample #3
Laser Cut Tube Sample #4 Laser Cutting System Laser Cutting System

Electropolishing & Passivating:

316L SS Tubes Electropolished and Laser Welded Pointed Cannula - Before and After Electropolishing Electropolished Dental Drills
Electropolished Hooks Before and After Electropolishing Electropolished Shaft - Magnified 20x

Northeast Laser Implements New Series of ‘Green’ Initiatives to Reduce Energy Consumption

December 4, 2010

Northeast Laser and Electropolish has implemented a series of "green" initiatives to reduce energy consumption throughout the company, and to reduce the volume of waste generated from its metal finishing operations.

Northeast Laser and Electropolish has implemented a series of "green" initiatives to reduce energy consumption throughout the company, and to reduce the volume of waste generated from its metal finishing operations.
Eight, energy efficient laser marking systems have been installed for both expansion and for replacement of high energy consuming, lamp pumped Nd-YAG laser marking systems. The new units consume between 200 and 400 watts of power compared to the retired systems which each consumed approximately 4.5 KW.

"Many of these systems are in operation over three shifts," explains Kurt England, one of the company partners. "In addition, energy efficient lighting has been installed in production areas of the facility, significantly reducing electrical demand as well."

Equipment in the metal finishing area has been updated and longer requires neutralization of rinse water, reducing solid waste generation by up to 90%. In addition, excess heat from the chilled water system is captured to supply the metal finishing operations. This upgrade has resulted in recycling heat that was previously expelled – reducing energy consumption (oil or electricity) required for metal finishing operations. Northeast Laser’s metal finishing operates under a zero-discharge policy.

Northeast Laser and Electropolish provides laser marking, laser welding, laser cutting, electropolishing and passivation services to a wide range of companies throughout the United States and abroad. The company is well known for quick turnaround, high quality, outstanding customer focus, and the ability to take on both high and low volume projects, whether technically routine or challenging.

Printable PDF